IPMC Ethernet requires mc reset cold for DHCP

Dear IPMC team,
we are currently testing with an IPMCv3 the usage of the Ethernet JTAG feature and run into a minor inconvenience regarding the Ethernet connection via DHCP. After inserting our module and powering it up, we need to do a mc reset cold for getting an IP adress. Is there a race condition or something similar that could cause it? How long is the IPMCs timeout before falling back to static IP and can this be deactivated?

Our current LAN xml part looks like this:

<LANConfig>
<!-- <MACAddr>0A:0A:0A:0A:FF:FF</MACAddr> -->
<NetMask>255.255.255.0</NetMask>
<GatewayIP>192.138.1.3</GatewayIP>
<UseFlashedMAC />
<EnableDHCP />

<IPAddrList> <!-- Default IP Addresses (used if DHCP is not active) -->
<IPAddr slot_addr="default">192.168.1.34</IPAddr>
<IPAddr slot_addr="0x41">192.168.1.20</IPAddr>
...
<IPAddr slot_addr="0x4f">192.168.1.34</IPAddr>
<IPAddr slot_addr="0x50">192.168.1.35</IPAddr>
</IPAddrList>
</LANConfig>

Thank you and cheers,
Emanuel

Hello Emmanuel,

we do not see this issue. I believe you need to remove all the entries from LANConfig, except for UseFlashedMAC and EnableDHCP. Then it should work as expected.

cheers,

Stefan

Hello Emmanuel,

we do not see this issue. I believe you need to remove all the entries from LANConfig, except for UseFlahsedMAC and EnableDHCP. Then it should work as expected.

cheers,

Stefan