The CERN-IPMC cannot activate the 12V if it does not receive the order from the shelf manager. This is why the tester is made to be inserted into a crate and/or to be used with a shelf manager devkit from pigeon point (simple way is to use it within a crate).
We inserted the DevKit into an ATCA shelf for testing 12 V EN,
but found that the power is not supplied to PIM400.
We found that fuse for VRTN has blown…
We would like to replace the fuse, and would appreciate
if you could let us know the type of the fuse used for VRTN of DevKit.
Also if you know possible reason for the fuse blowing in the ATCA shelf,
we would appreciate if you could tell us.
I just wanted to come back to your Discourse topic and ask you if you have solved your problems with using the IPMC Tester (DevKit).
In the meantime, on our side at CERN, we have found out that some components on the IPMC tester are in fact undersized and need to be replaced. We could tell you which ones need replacing, or we could offer to exchange your board, if there is an easy way to arrange for it. Please let me know how to proceed.
We have replaced the original capacitor with: EEUEB1J221, Panasonic, 220uF/63V
F1-F6
We have replaced the original fuses with: SF-0603S150M-2, Bourns, fuse, 1.5A
C48, C49
These capacitors are for the holdup voltage from the power input module which is set to 75V. For an operating voltage of the 75V, the voltage rating should be at least 100V. It is difficult to find components that don’t violate the height limitation of ATCA cards. Mounting the components at a 90deg angle may be possible.
The small USB connectors (Management and UART0-2) have not been soldered very well. We recommend to add some solder to the through-ole pins for better mechanical stability.
As Ralf has mentioned, we can replace your tester by one that has been updated.
Thanks for the information about the recommended modifications.
There are several elements which have not been replaced for our development kit.
We would appreciate if you replace the board with the updated one.
Since we have two kits purchased, we would be glad if you could replace both of them.
I will assign my colleague to pick up the boards at CERN.
Since we are using the kits right now for developments, we want to send them after receiving the new ones transferred from CERN to Japan, if it is fine for you.
I can prepare two boards for you but this will take some time due to vacation. I think I can have the boards ready at the beginning of May. Does that work for you?
You have certainly noticed that the beginning of May has passed. Due to high work load and the absence of a colleague who got sick I have not yet managed to prepare the Testers for you but they have now at least reached the top of my priority list.
The testers are ready. Can one of your colleagues pick them up from my office (14-2-21) today or tomorrow? If you want, I could also ship them to Japan. Please advise.
Note: I will be on vacation next week.