# RE:IPMC

**URL:** <https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84>\
**Category:** General issue\
**Created:** [August 24, 2021, 12:05pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84 "2021-08-24T12:05:30Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![jumendez](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/77aa72/32.png) [@jumendez](https://cern-ipmc-forum.web.cern.ch/u/jumendez)\
**Post date:** [August 24, 2021, 12:05pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/1 "2021-08-24T12:05:30Z")

</div>

Hello Julian,

When I run:

pcphl1ct10:~% ipmitool -I lanplus -H 192.168.3.10 -U soluser -P solpasswd -k gkey sol activate

I get:

[SOL Session operational. Use ~? for help]

\<\_\>: RMCP+ session expired (session ID = 00000002)

\<\_\>: FRU 0 state: M2-\>M3, cause = 1

: Sensor alert

 

\<\_\>: FRU 0 state: M3-\>M4, cause = 0

 

\<\_\>: FRU 0 state: M4-\>M6, cause = 1

 

\<\_\>: FRU 0 state: M6-\>M1, cause = 0

 

\<\_\>: FRU 0 state: M1-\>M2, cause = 3

 

\<\_\>: FRU 0 state: M2-\>M3, cause = 1

 

: Sensor alert

 

\<\_\>: FRU 0 state: M3-\>M4, cause = 0

 

\<\_\>: FRU 0 state: M4-\>M6, cause = 1

 

\<\_\>: FRU 0 state: M6-\>M1, cause = 0

 

\<\_\>: FRU 0 state: M1-\>M2, cause = 3

 

\<\_\>: FRU 0 state: M2-\>M3, cause = 1

 

\<A\<\_\>: FRU 0 state: M4-\>M6, cause = 1

 

Question: Does this indicate an error?

 

Observation: I cannot terminate “ipmitool -I lanplus -H 192.168.3.10 -U soluser -P solpasswd -k gkey sol activate” with ctrl+c. Instead I have to look up the PID and “kill -9” it. Is this a known issue?

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 24, 2021, 12:16pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/2 "2021-08-24T12:16:14Z")

</div>

Hello Julian,

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 24, 2021, 2:12pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/3 "2021-08-24T14:12:36Z")

</div>

Hello Julian,

Stefan and I have fixed a few bugs in my config.xml.

I still get one message from the SOL/minicom:

: Sensor alert

 

What does that mean?

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![jumendez](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/77aa72/32.png) [@jumendez](https://cern-ipmc-forum.web.cern.ch/u/jumendez)\
**Post date:** [August 30, 2021, 8:05am UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/4 "2021-08-30T08:05:55Z")

</div>

Hello Julian,

Stefan and I have fixed a few bugs in my config.xml.

I still get one message from the SOL/minicom:

: Sensor alert

 

What does that mean?

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 31, 2021, 1:07pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/5 "2021-08-31T13:07:45Z")

</div>

Hello Julian,

“ipmitool -H 192.168.0.2 -P ‘’ -t 0x82 sensor” returns:

Hot Swap | 0x0 | discrete | 0x1080| na | na | na | na | na | na

IPMB Physical | 0x88 | discrete | 0x0880| na | na | na | na | na | na

Version change | 0x0 | discrete | 0x0080| na | na | na | na | na | na

IPMC TEMP | 32.000 | degrees C | ok | na | na | na | 35.000 | 45.000 | 55.000

MSPA VCCINT | 0.849 | Volts | ok | na | 0.825 | na | na | 0.879 | na

MSPA MGTAVCC | 0.898 | Volts | ok | na | 0.879 | na | na | 0.932 | na

MSPA MGTAVTT | 1.201 | Volts | ok | na | 1.172 | na | na | 1.230 | na

MSPA MGTAVCCAUX | 1.789 | Volts | ok | na | 1.760 | na | na | 1.858 | na

MSPA LTC TEMP | 34.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPC VCCINT | 0.849 | Volts | ok | na | 0.825 | na | na | 0.879 | na

MSPC MGTAVCC | 0.898 | Volts | ok | na | 0.879 | na | na | 0.932 | na

MSPC MGTAVTT | 1.201 | Volts | ok | na | 1.172 | na | na | 1.230 | na

MSPC MGTAVCCAUX | 1.799 | Volts | ok | na | 1.760 | na | na | 1.858 | na

MSPC LTC TEMP | 35.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

TRP VCCINT | 0.947 | Volts | ok | na | 0.923 | na | na | 0.981 | na

TRP MGTAVCC | 0.996 | Volts | ok | na | 0.971 | na | na | 1.030 | na

TRP MGTAVTT | 1.191 | Volts | ok | na | 1.172 | na | na | 1.230 | na

TRP MGTAVCCAUX | 1.799 | Volts | ok | na | 1.760 | na | na | 1.858 | na

TRP LTC TEMP | 39.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPA TMP431 TEMP | 33.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPA FPGA TEMP | 0.000 | degrees C | ok | na | na | na | 57.000 | 70.000 | 85.000

MSPC TMP431 TEMP | 36.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPC FPGA TEMP | 0.000 | degrees C | ok | na | na | na | 57.000 | 70.000 | 85.000

TRP TMP431 TEMP | 41.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

TRP FPGA TEMP | 54.000 | degrees C | ok | na | na | na | 55.000 | 70.000 | 85.000

ZYNQ TMP431 TEMP | 34.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

ZYNQ FPGA TEMP | 43.500 | degrees C | ok | na | na | na | 55.000 | 70.000 | 85.000

ZYNQ VCCINT | 0.838 | Volts | ok | na | 0.829 | na | na | 0.878 | na

DDR3 VCCIO | 1.201 | Volts | ok | na | 1.142 | na | na | 1.270 | na

1.8V PAYLOAD PWR | 1.799 | Volts | ok | na | 1.750 | na | na | 1.858 | na

2.5V PAYLOAD PWR | 2.500 | Volts | ok | na | 2.383 | na | na | 2.637 | na

3.3V PAYLOAD PWR | 3.300 | Volts | ok | na | 3.163 | na | na | 3.475 | na

12V PAYLOAD PWR | 12.020 | Volts | ok | na | 11.030 | na | na | 13.010 | na

LTC2991 TEMP | 33.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

3.3V MGMT PWR | 3.313 | Volts | ok | na | 3.137 | na | na | 3.470 | na

QBDW033A VIN | 48.000 | Volts | ok | na | 40.000 | na | na | 55.000 | na

QBDW033A VOUT | 11.892 | Volts | ok | na | 10.032 | na | na | 14.000 | na

QBDW033A IOUT | 4.500 | Amps | ok | na | na | na | na | 25.000 | na

QBDW033A TEMP | 41.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

PIM400 V\_HOLDUP | 71.645 | Volts | ok | na | 70.053 | na | na | 80.003 | na

PIM400 IOUT | 1.316 | Amps | ok | na | na | na | na | 6.580 | na

PIM400 M48V\_AF | 47.775 | Volts | ok | na | 40.300 | na | na | 55.250 | na

PIM400 M48V\_BF | 48.100 | Volts | ok | na | 40.300 | na | na | 55.250 | na

PIM400 TEMP | 34.280 | degrees C | ok | na | na | na | 46.040 | 51.920 | 55.840

ZYNQ DONE | 0x0 | discrete | 0x0180| na | na | na | na | na | na

PG 12V | 0x0 | discrete | 0x0280| na | na | na | na | na | na

MPOD RX1 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX2 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX3 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX4 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX5 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX6 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX7 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX8 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX9 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX10 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX11 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX12 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX13 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX14 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX15 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX16 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX17 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX18 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX1 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX2 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX3 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX4 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX5 TEMP | 44.500 | degrees C | ok | na | na | na | 50.000 | 55.000 | 65.000

MPA MGTAVCC TEMP | 48.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPA MGTAVTT TEMP | 52.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPA VCCINT TEMP | 56.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPC MGTAVCC TEMP | 47.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPC MGTAVTT TEMP | 53.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPC VCCINT TEMP | 58.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

TRP VCCINT TEMP | 54.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

TRP MGTAVXX TEMP | 58.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

ZYQ/DDR VCC TEMP | 54.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

1.8V DCDC TEMP | 58.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

2.5V DCDC TEMP | 58.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

3.3V DCDC TEMP | 56.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPA MGTAVCC IOUT | 0.100 | Amps | ok | na | na | na | 10.000 | 15.000 | 20.000

MPA MGTAVTT IOUT | 0.200 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

MPA VCCINT IOUT | 0.000 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

MPC MGTAVCC IOUT | 0.100 | Amps | ok | na | na | na | 10.000 | 15.000 | 20.000

MPC MGTAVTT IOUT | 0.200 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

MPC VCCINT IOUT | 0.000 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

TRP VCCINT IOUT | 5.000 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

TRP MGTAVCC IOUT | 5.600 | Amps | ok | na | na | na | 10.000 | 13.000 | 16.000

TRP MGTAVTT IOUT | 7.100 | Amps | ok | na | na | na | 10.000 | 13.000 | 16.000

DDR VCCIO IOUT | 0.700 | Amps | ok | na | na | na | 8.000 | 10.000 | 12.000

ZYNQ VCCINT IOUT | 2.100 | Amps | ok | na | na | na | 8.000 | 10.000 | 12.000

1.8V VCCIO IOUT | 1.900 | Amps | ok | na | na | na | 17.000 | 20.000 | 23.000

2.5V VCCIO IOUT | 2.300 | Amps | ok | na | na | na | 17.000 | 20.000 | 23.000

3.3V VCCIO IOUT | 2.600 | Amps | ok | na | na | na | 17.000 | 20.000 | 23.000

Can you identify the sensor that is “out of bunds”?

Why can the S/W not add the sensor number or name to the “: Sensor alert” message?

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![jumendez](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/77aa72/32.png) [@jumendez](https://cern-ipmc-forum.web.cern.ch/u/jumendez)\
**Post date:** [August 31, 2021, 1:31pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/6 "2021-08-31T13:31:16Z")

</div>

Hello Julian,

“ipmitool -H 192.168.0.2 -P ‘’ -t 0x82 sensor” returns:

Hot Swap | 0x0 | discrete | 0x1080| na | na | na | na | na | na

IPMB Physical | 0x88 | discrete | 0x0880| na | na | na | na | na | na

Version change | 0x0 | discrete | 0x0080| na | na | na | na | na | na

IPMC TEMP | 32.000 | degrees C | ok | na | na | na | 35.000 | 45.000 | 55.000

MSPA VCCINT | 0.849 | Volts | ok | na | 0.825 | na | na | 0.879 | na

MSPA MGTAVCC | 0.898 | Volts | ok | na | 0.879 | na | na | 0.932 | na

MSPA MGTAVTT | 1.201 | Volts | ok | na | 1.172 | na | na | 1.230 | na

MSPA MGTAVCCAUX | 1.789 | Volts | ok | na | 1.760 | na | na | 1.858 | na

MSPA LTC TEMP | 34.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPC VCCINT | 0.849 | Volts | ok | na | 0.825 | na | na | 0.879 | na

MSPC MGTAVCC | 0.898 | Volts | ok | na | 0.879 | na | na | 0.932 | na

MSPC MGTAVTT | 1.201 | Volts | ok | na | 1.172 | na | na | 1.230 | na

MSPC MGTAVCCAUX | 1.799 | Volts | ok | na | 1.760 | na | na | 1.858 | na

MSPC LTC TEMP | 35.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

TRP VCCINT | 0.947 | Volts | ok | na | 0.923 | na | na | 0.981 | na

TRP MGTAVCC | 0.996 | Volts | ok | na | 0.971 | na | na | 1.030 | na

TRP MGTAVTT | 1.191 | Volts | ok | na | 1.172 | na | na | 1.230 | na

TRP MGTAVCCAUX | 1.799 | Volts | ok | na | 1.760 | na | na | 1.858 | na

TRP LTC TEMP | 39.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPA TMP431 TEMP | 33.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPA FPGA TEMP | 0.000 | degrees C | ok | na | na | na | 57.000 | 70.000 | 85.000

MSPC TMP431 TEMP | 36.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

MSPC FPGA TEMP | 0.000 | degrees C | ok | na | na | na | 57.000 | 70.000 | 85.000

TRP TMP431 TEMP | 41.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

TRP FPGA TEMP | 54.000 | degrees C | ok | na | na | na | 55.000 | 70.000 | 85.000

ZYNQ TMP431 TEMP | 34.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

ZYNQ FPGA TEMP | 43.500 | degrees C | ok | na | na | na | 55.000 | 70.000 | 85.000

ZYNQ VCCINT | 0.838 | Volts | ok | na | 0.829 | na | na | 0.878 | na

DDR3 VCCIO | 1.201 | Volts | ok | na | 1.142 | na | na | 1.270 | na

1.8V PAYLOAD PWR | 1.799 | Volts | ok | na | 1.750 | na | na | 1.858 | na

2.5V PAYLOAD PWR | 2.500 | Volts | ok | na | 2.383 | na | na | 2.637 | na

3.3V PAYLOAD PWR | 3.300 | Volts | ok | na | 3.163 | na | na | 3.475 | na

12V PAYLOAD PWR | 12.020 | Volts | ok | na | 11.030 | na | na | 13.010 | na

LTC2991 TEMP | 33.500 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

3.3V MGMT PWR | 3.313 | Volts | ok | na | 3.137 | na | na | 3.470 | na

QBDW033A VIN | 48.000 | Volts | ok | na | 40.000 | na | na | 55.000 | na

QBDW033A VOUT | 11.892 | Volts | ok | na | 10.032 | na | na | 14.000 | na

QBDW033A IOUT | 4.500 | Amps | ok | na | na | na | na | 25.000 | na

QBDW033A TEMP | 41.000 | degrees C | ok | na | na | na | 45.000 | 50.000 | 55.000

PIM400 V\_HOLDUP | 71.645 | Volts | ok | na | 70.053 | na | na | 80.003 | na

PIM400 IOUT | 1.316 | Amps | ok | na | na | na | na | 6.580 | na

PIM400 M48V\_AF | 47.775 | Volts | ok | na | 40.300 | na | na | 55.250 | na

PIM400 M48V\_BF | 48.100 | Volts | ok | na | 40.300 | na | na | 55.250 | na

PIM400 TEMP | 34.280 | degrees C | ok | na | na | na | 46.040 | 51.920 | 55.840

ZYNQ DONE | 0x0 | discrete | 0x0180| na | na | na | na | na | na

PG 12V | 0x0 | discrete | 0x0280| na | na | na | na | na | na

MPOD RX1 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX2 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX3 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX4 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX5 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX6 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX7 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX8 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX9 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX10 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX11 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX12 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX13 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX14 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX15 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX16 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX17 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD RX18 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX1 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX2 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX3 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX4 TEMP | na | degrees C | na | na | na | na | 50.000 | 55.000 | 65.000

MPOD TX5 TEMP | 44.500 | degrees C | ok | na | na | na | 50.000 | 55.000 | 65.000

MPA MGTAVCC TEMP | 48.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPA MGTAVTT TEMP | 52.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPA VCCINT TEMP | 56.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPC MGTAVCC TEMP | 47.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPC MGTAVTT TEMP | 53.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPC VCCINT TEMP | 58.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

TRP VCCINT TEMP | 54.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

TRP MGTAVXX TEMP | 58.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

ZYQ/DDR VCC TEMP | 54.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

1.8V DCDC TEMP | 58.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

2.5V DCDC TEMP | 58.500 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

3.3V DCDC TEMP | 56.000 | degrees C | ok | na | na | na | 65.000 | 75.000 | 85.000

MPA MGTAVCC IOUT | 0.100 | Amps | ok | na | na | na | 10.000 | 15.000 | 20.000

MPA MGTAVTT IOUT | 0.200 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

MPA VCCINT IOUT | 0.000 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

MPC MGTAVCC IOUT | 0.100 | Amps | ok | na | na | na | 10.000 | 15.000 | 20.000

MPC MGTAVTT IOUT | 0.200 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

MPC VCCINT IOUT | 0.000 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

TRP VCCINT IOUT | 5.000 | Amps | ok | na | na | na | 20.000 | 25.000 | 30.000

TRP MGTAVCC IOUT | 5.600 | Amps | ok | na | na | na | 10.000 | 13.000 | 16.000

TRP MGTAVTT IOUT | 7.100 | Amps | ok | na | na | na | 10.000 | 13.000 | 16.000

DDR VCCIO IOUT | 0.700 | Amps | ok | na | na | na | 8.000 | 10.000 | 12.000

ZYNQ VCCINT IOUT | 2.100 | Amps | ok | na | na | na | 8.000 | 10.000 | 12.000

1.8V VCCIO IOUT | 1.900 | Amps | ok | na | na | na | 17.000 | 20.000 | 23.000

2.5V VCCIO IOUT | 2.300 | Amps | ok | na | na | na | 17.000 | 20.000 | 23.000

3.3V VCCIO IOUT | 2.600 | Amps | ok | na | na | na | 17.000 | 20.000 | 23.000

Can you identify the sensor that is “out of bunds”?

Why can the S/W not add the sensor number or name to the “: Sensor alert” message?

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 31, 2021, 1:34pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/7 "2021-08-31T13:34:42Z")

</div>

Hello Julian,

In the meantime we have figured out that the messages stop when I comment out the two GPIO sensors.

Cheers,

Markus

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 31, 2021, 1:35pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/8 "2021-08-31T13:35:45Z")

</div>

PS: We are still paying PigeonPoint the annual maintenance fee. If we are not happy with their product, we should tell them.

Cheers,

Markus

---

<div class="post-metadata">

**Author:** ![haass](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/h/f9ae1b/32.png) [@haass](https://cern-ipmc-forum.web.cern.ch/u/haass)\
**Post date:** [August 31, 2021, 3:00pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/9 "2021-08-31T15:00:08Z")

</div>

Hello Markus,

if the issue is related to the GPIO sensors, then maybe the masks in the INF file need to be adapted, e.g.

```auto
Assertion Event Mask = 0x00FF
Deassertion Event Mask = 0x0000
Discrete Reading Mask = 0x00FF

```

However I don’t know exactly how to set the values, this may require digging into the PigeonPoint documentation and the IPMI specification.

cheers,

Stefan

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 31, 2021, 3:08pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/10 "2021-08-31T15:08:17Z")

</div>

Hello,

In config.xml the PG12V sensor looks like this:

ZYNQ DONE

Processor

0x1

USER\_IO\_4

0x000F

I guess (Julian may correct me) that modifying the value of DiscreteRdMask and adding the (de)assertion parameters should be possible. Or does “set the values” refer to something else?

Cheers,

Markus

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 31, 2021, 3:17pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/11 "2021-08-31T15:17:22Z")

</div>

I have added the GPIO sensors again (with the parameters proposed by Stefan) and the “: Sensor alert” errors are back.

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [August 31, 2021, 3:29pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/12 "2021-08-31T15:29:25Z")

</div>

Is it expected that “clia threshold 82” does not show anything for the GPIO sensors?

From “clia sensordata 82” I get:

82: LUN: 0, Sensor # 52 (“ZYNQ DONE”)

Type: Discrete (0x03), “Processor” (0x07)

Belongs to entity (0xa0, 0x60): FRU # 0

Status: 0xc0

All event messages enabled from this sensor

Sensor scanning enabled

Initial update completed

Sensor reading: 0x00

Current State Mask 0x0001

State Deasserted

82: LUN: 0, Sensor # 53 (“PG 12V”)

Type: Discrete (0x03), “Processor” (0x07)

Belongs to entity (0xa0, 0x60): FRU # 0

Status: 0xc0

All event messages enabled from this sensor

Sensor scanning enabled

Initial update completed

Sensor reading: 0x00

Current State Mask 0x0002

State Asserted

It is strange that one sensor has “State Deasserted” and the other “State Asserted”.

Cheers,

Markus

---

<div class="post-metadata">

**Author:** ![haass](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/h/f9ae1b/32.png) [@haass](https://cern-ipmc-forum.web.cern.ch/u/haass)\
**Post date:** [August 31, 2021, 3:41pm UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/13 "2021-08-31T15:41:46Z")

</div>

Hello Markus,

the fact that the sensor reading is 0 is normal, this is only defined for threshold sensors. The actual value of the sensor is in the current state mask.

I looked up the GPIO sensors in the PigeonPoint documentation (page 95-96) here:

Can you try setting the the alertmask parameter to 0 for the two GPIO sensors? In assume that in this case the error message should disappear.

cheers,

Stefan

---

<div class="post-metadata">

**Author:** ![joos](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/a3d4f5/32.png) [@joos](https://cern-ipmc-forum.web.cern.ch/u/joos)\
**Post date:** [September 1, 2021, 7:10am UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/14 "2021-09-01T07:10:58Z")

</div>

Hello Stefan,

I have modified config.xml as follows:

ZYNQ DONE

Processor

0x0

USER\_IO\_4

0x000F

PG 12V

Processor

0x0

IPM\_IO\_4\_ACTH

0x000F

The new F/W has been uploaded to the IPMC and the “: Sensor alert” messages have stopped.

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![jumendez](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/77aa72/32.png) [@jumendez](https://cern-ipmc-forum.web.cern.ch/u/jumendez)\
**Post date:** [September 1, 2021, 8:23am UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/15 "2021-09-01T08:23:15Z")

</div>

Hello Stefan,

I have modified config.xml as follows:

ZYNQ DONE

Processor

0x0

USER\_IO\_4

0x000F

PG 12V

Processor

0x0

IPM\_IO\_4\_ACTH

0x000F

The new F/W has been uploaded to the IPMC and the “: Sensor alert” messages have stopped.

 

Cheers,

 

Markus

---

<div class="post-metadata">

**Author:** ![haass](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/h/f9ae1b/32.png) [@haass](https://cern-ipmc-forum.web.cern.ch/u/haass)\
**Post date:** [September 1, 2021, 8:24am UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/16 "2021-09-01T08:24:24Z")

</div>

Hello Markus,

thanks, I will need to review the alert masks. However I don’t understand why the GPIO dicrete sensors generate this message, whereas threshold sensors don’t.

cheers,

Stefan

---

<div class="post-metadata">

**Author:** ![jumendez](https://cern-ipmc-forum.web.cern.ch/letter_avatar_proxy/v4/letter/j/77aa72/32.png) [@jumendez](https://cern-ipmc-forum.web.cern.ch/u/jumendez)\
**Post date:** [September 1, 2021, 8:30am UTC](https://cern-ipmc-forum.web.cern.ch/t/re-ipmc/84/17 "2021-09-01T08:30:22Z")

</div>

Hello,

According to the user guide, the behaviour sounds OK:

 ![image002.jpg](https://cern-ipmc-forum.web.cern.ch/uploads/default/original/1X/a97239326001c402d3ae5656b5b091c24dd21797.jpeg)

Then, when you set 0x1, an alert is triggered when the GPIO status goes to deasserted. As you have a sensor de-asserted, you get this alert, which sounds OK.

Best,

Julian